Simplex EP10 Manual de usuario descargar pdf (Pagina 23)

EP10 Time Recorder User Guide

Page 24

Function 14 – Confirmation Beep Disable/Enable

When prompted to select whether the confirmation beep will

sound or will be disabled, use the + button to scroll forward

or the - button to scroll backwards. With the desired setting

showing on the display, press the SET button. The „TruAlign

Calibration‟ function (15) will display next.

If enabled, a confirmation beep will sound after each imprint

on a timecard.

Setting Values

n = Confirmation beep disabled, this is the factory

setting

y = Confirmation beep is enabled

Example: Set the confirmation beep to enabled (y)

Step 1

Press the  or - button until the display

shows „y‟.

Step 2

Press the SET button when the setting is

correct. The setting will be accepted, go to

the „TruAlign Calibration‟ function.

Note: If you scroll past the setting you wish,

continue pressing the  or - button until

the desired setting displays, then press the

SET button.

14: y

14: n

Enable/Disable

Beep

Function #

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 39 40

Sin comentarios

Simplex EP10 Manual de usuario Pagina 23